High Voltage Ceramic Disc Capacitor 20KV 1000PF(20KV 102K)

Description:

1. High rated voltage 20KV, 1000pf 2. Dielectric strength at 150% rated voltage3. Low dissipation factor at 1%4. Y5T

  • Additional Description

High Voltage Ceramic Disc Capacitor 20KV 1000PF (20KV 102M)

 

Manufacturer: HVC

 

Series: Ceramic Disc Type Capacitor

 

Capacitance: 1000pf (102M)

 

Voltage - Rated: 20KV

 

Tolerance: K---± 10 %

 

Temperature CoefficientY5T

 

Mounting Type: Leaded,Through Hole

 

Operating Temperature: -25℃~+85℃

 

Dielectric Strength: 150% of rated voltage

 

Dissipation Factor tanδ: 1% 

 

Insulation Resistance: Min. 200 000 MΩ at 25 °C

 

Product Description: 

104 capacitorcapacitor manufacturer, power factor capacitorspower supply capacitorsvoltage filtercapacitor supplierdisc capacitordisk capacitorpower factor correction capacitor1uf capacitorcapacitor distributorsmotor run capacitors

 

Application: 

Capacitor SwitchesVacuum SwitchesCombined Disconnecting Circuit BreakerDisconnecting Circuit BreakerCircuit BreakerDisconnectorCT Scanner, (CT)Current TransformerIndustrial Current TransformersCircuit BreakerCircuit Protection

Capacitor knowledge:

High-voltage ceramic capacitor is a circular plate capacitor with ceramic materials as the medium. In "ceramic" capacitor, DC 50V below is generally called low voltage, DC 100V ~ 500V is medium and high voltage, DC 1000V ~ 6000V and high voltage, safety regulation Y capacitor is also high voltage, DC 6000V above is ultra-high voltage. High-voltage ceramic capacitors have the characteristics of wear-resisting DC and high-voltage, and are suitable for high-voltage bypass and coupling circuits, in which low-loss high-voltage wafers have low dielectric loss, especially suitable for TV receivers and scanning circuits in the use of safety capacitors is used in such occasions, that capacitors will not cause failure. Electric shock does not endanger personal safety. It includes X capacitors and Y capacitors. X capacitor is the capacitance across the power line between the two lines (L-N), the general choice of metal film capacitor; Y capacitor is separately across the power line between the two lines and the ground (L-E, N-E) capacitance, generally in pairs.